MPS Industries, Inc. - P6201 Series RS-485/RS-422 Interface Push-Pull Transformers

Designed for use with the Maxim™ MAX253, MAX845 and Analog Devices™ ADM2485 or equivalent to provide isolated RS-485, RS-232, and RS-422 interfaces.
Small Size: 15.00 mm x 10.40 mm x 6.50 mm

Request Information Sample or Quote Request SMPS Transformer Custom Design

Unit of Measure

Items	P6201-21 1.50 Microhenry (µH) Maximum Inductance L_L(1-4) P6201 Series RS-485/RS-422 Interface Push-Pull Transformer	P6201-83 2.00 Microhenry (µH) Maximum Inductance L_L(1-4) P6201 Series RS-485/RS-422 Interface Push-Pull Transformer	P6201-43 1.20 Microhenry (µH) Maximum Inductance L_L(1-4) P6201 Series RS-485/RS-422 Interface Push-Pull Transformer	P6201-34 1.20 Microhenry (µH) Maximum Inductance L_L(1-4) P6201 Series RS-485/RS-422 Interface Push-Pull Transformer	P6201-11 1.00 Microhenry (µH) Maximum Inductance L_L(1-4) P6201 Series RS-485/RS-422 Interface Push-Pull Transformer
Typical Inductance (1-4)	N/A 500 µH
Turns Ratio (1-4 : 8-5) (±5 %)	N/A 2CT : 1CT	N/A 2.67CT : 1CT	N/A 1.33CT : 1CT	N/A 1CT : 1.33CT	N/A 1CT : 1CT
Maximum ET (1-4)	N/A 18 V-µSec	N/A 18 V-µSec	N/A 11 V-µSec	N/A 11 V-µSec	N/A 11 V-µSec
Maximum Direct Current Resistance (DCR) (1-4)	N/A 1.50 Ohm	N/A 1.50 Ohm	N/A 1.00 Ohm	N/A 1.00 Ohm	N/A 1.00 Ohm
Maximum Inductance L_L(1-4)	N/A 1.50 µH	N/A 2.00 µH	N/A 1.20 µH	N/A 1.20 µH	N/A 1.00 µH
Maximum Capacitance Cww (1-4 to 8-5)	N/A 50 pF
Dimension	N/A 15.00 x 10.40 x 6.50 mm
High Isolation Voltage	N/A 2.5 kV
Industry Standards / Certifications	N/A RoHS Compliant
Standard Operating Temperature Range	N/A -40 to +85 ºC
Available Design	N/A custom
Note	N/A Primary: Connect 1-2 and 3-4 in series Secondary: Connect 8-7 and 6-5 in series OCL, L_L, Cww measured at 100 kHz, 0.1 Vrms Hipot: 2500 Vrms, 1 mA, 2 S, Primary to Secondary Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X.X : ±0.38 X.XX : ±0.10