MPS Industries, Inc. - P9101 Series Push-Pull Cold Cathode Fluorescent Lamp (CCFL) Transformers

CCFL Transformers with output power up to 6 watts
Designed for 40 kHz - 100 kHz LCD backlight applications

Request Information Sample or Quote Request SMPS Transformer Custom Design

Unit of Measure

Items	P9101-1 23 Volt (V) Primary Voltage P9101 Series Push-Pull Cold Cathode Fluorescent Lamp (CCFL) Transformer	P9101-2 20 Volt (V) Primary Voltage P9101 Series Push-Pull Cold Cathode Fluorescent Lamp (CCFL) Transformer	P9101-3 32 Volt (V) Primary Voltage P9101 Series Push-Pull Cold Cathode Fluorescent Lamp (CCFL) Transformer	P9101-4 26 Volt (V) Primary Voltage P9101 Series Push-Pull Cold Cathode Fluorescent Lamp (CCFL) Transformer	P9101-5 18 Volt (V) Primary Voltage P9101 Series Push-Pull Cold Cathode Fluorescent Lamp (CCFL) Transformer
Nominal Primary OCL	N/A 44 µH	N/A 44 µH	N/A 44 µH	N/A 44 µH	N/A 31 µH
Maximum Direct Current Resistance (DCR)	N/A 0.22 Ohm	N/A 0.16 Ohm	N/A 0.22 Ohm	N/A 0.16 Ohm	N/A 0.13 Ohm
Primary Voltage	N/A 23 V	N/A 20 V	N/A 32 V	N/A 26 V	N/A 18 V
Primary : Secondary Turns Ratio (±5 %)	N/A 1 : 67	N/A 1 : 67	N/A 1 : 50	N/A 1 : 50	N/A 1 : 86
Primary : Fb Turns Ratio (±5 %)	N/A 1 : 0.19	N/A 1 : 0.17	N/A 1 : 0.14	N/A 1 : 0.17	N/A 1 : 0.21
Maximum Isec (7-10)	N/A 5 mA	N/A 11 mA	N/A 7 mA	N/A 11 mA	N/A 11 mA
Maximum Secondary Direct Current Resistance (DCR) (7-10)	N/A 285 Ohm	N/A 176 Ohm	N/A 165 Ohm	N/A 132 Ohm	N/A 176 Ohm
Maximum Fb Direct Current Resistance (DCR)	N/A 0.10 Ohm
Output Power	N/A Up to 6 W
Frequency	N/A 40 to 100 kHz
Standard Operating Temperature Range	N/A -40 to +85 ºC
Industry Standards / Certifications	N/A RoHS Compliant
Available Design	N/A custom
Note	N/A Inductance measured @ 100 kHz, 0.1 Vrms for both halves Primary (Example: 1-3, 1-5) Hipot: 1500 Vrms, 5 seconds ( Primary and Fb to Secondary ), except Schematic D, which is 500 Vrms Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X.X : ±0.38 X.XX : ±0.10