MPS Industries, Inc. - PSF74 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductors

Magnetic shielding using magnetic epoxy resin results in lower costs as compared to traditional ferrite shielded inductors

Request Information Sample or Quote Request Inductor Custom Design

Unit of Measure

Items	PSF74-100M 10 Microhenry (µH) Inductance (±20%) PSF74 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF74-150M 15 Microhenry (µH) Inductance (±20%) PSF74 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF74-220M 22 Microhenry (µH) Inductance (±20%) PSF74 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF74-330M 33 Microhenry (µH) Inductance (±20%) PSF74 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF74-390M 39 Microhenry (µH) Inductance (±20%) PSF74 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor
Inductance (±20%)	N/A 10 µH	N/A 15 µH	N/A 22 µH	N/A 33 µH	N/A 39 µH
Maximum Saturation Current (I_sat) (Adc)	N/A 1.84 A	N/A 1.47 A	N/A 1.23 A	N/A 0.96 A	N/A 0.91 A
Maximum Direct Current Resistance (DCR)	N/A 0.049 Ohm	N/A 0.081 Ohm	N/A 0.110 Ohm	N/A 0.17 Ohm	N/A 0.230 Ohm
Length	N/A 7.5 mm
Width	N/A 7.0 mm
Height	N/A 4.5 mm
Industry Standards / Certifications	N/A RoHS Compliant
Standard Operating Temperature Range	N/A -40 to +120 ºC
Available Design	N/A custom
Note	N/A Inductance measured at 100 kHz, 0.1 Vrms Isat: ΔL drops 25% maximum from its initial value Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X.X : ±0.38 X.XX : ±0.10