MPS Industries, Inc. - PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductors

Magnetic shielding using magnetic epoxy resin results in lower costs as compared to traditional ferrite shielded inductors

Request Information Sample or Quote Request Inductor Custom Design

Unit of Measure

Items	PSF8040-100M 10 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF8040-150M 15 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF8040-220M 22 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF8040-330M 33 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF8040-470M 47 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor
Inductance (±20%)	N/A 10 µH	N/A 15 µH	N/A 22 µH	N/A 33 µH	N/A 47 µH
Maximum Saturation Current (I_sat) (Adc)	N/A 3.20 A	N/A 2.60 A	N/A 2.20 A	N/A 1.80 A	N/A 1.50 A
Maximum Direct Current Resistance (DCR)	N/A 0.038 Ohm	N/A 0.058 Ohm	N/A 0.075 Ohm	N/A 0.110 Ohm	N/A 0.16 Ohm
Length	N/A 8.7 mm
Width	N/A 8.6 mm
Height	N/A 4.0 mm
Industry Standards / Certifications	N/A RoHS Compliant
Standard Operating Temperature Range	N/A -40 to +120 ºC
Available Design	N/A custom
Note	N/A Inductance measured at 100 kHz, 0.1 Vrms Isat: ΔL drops 30% maximum from its initial value Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X.X : ±0.38 X.XX : ±0.10