MPS Industries, Inc. - PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductors - Compare Items

Products

Magnetic shielding using magnetic epoxy resin results in lower costs as compared to traditional ferrite shielded inductors

Request Information

Unit of Measure

Items	PSF8040-100M 10 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF8040-150M 15 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF8040-220M 22 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF8040-330M 33 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor	PSF8040-470M 47 Microhenry (µH) Inductance (±20%) PSF8040 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor
Maximum Saturation Current (I_sat) (Adc)	N/A 3.20 A	N/A 2.60 A	N/A 2.20 A	N/A 1.80 A	N/A 1.50 A
Length	N/A 8.7 mm
Width	N/A 8.6 mm
Height	N/A 4.0 mm
Industry Standards / Certifications	N/A RoHS Compliant
Standard Operating Temperature Range	N/A -40 to +120 ºC
Available Design	N/A Custom
Note	N/A Inductance measured at 100 kHz, 0.1 Vrms Isat: ΔL drops 30% maximum from its initial value Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X.X : ±0.38 X.XX : ±0.10
Inductance	N/A 10 µH	N/A 15 µH	N/A 22 µH	N/A 33 µH	N/A 47 µH
Maximum Direct Current Resistance (DCR)	N/A 38 mOhm	N/A 58 mOhm	N/A 75 mOhm	N/A 110 mOhm	N/A 160 mOhm