MPS Industries, Inc.
MPS Industries, Inc.
Address: 19210 S. Vermont Avenue
Building D-415
Gardena, CA 90248
Tel: 310.325.1043
Fax: 800-000-0000
Email: sales@mpsind.com
Website: www.mpsind.com
Print Back
  • AC line filter common mode choke
  • Dielectric withstanding voltage: 3750 Vrms (between windings)
P52U105 Series Common Mode Chokes
Unit of Measure
Items P52U105 Series Common Mode Chokes
P52U157-601-4.4
4.40 Ampere (A) Rated Current (Irms) P52U157 Series Common Mode Choke 		P52U105 Series Common Mode Chokes
P52U157-102-3.6
3.60 Ampere (A) Rated Current (Irms) P52U157 Series Common Mode Choke 		P52U105 Series Common Mode Chokes
P52U157-202-2.9
2.9 Ampere (A) Rated Current (Irms) P52U157 Series Common Mode Choke 		P52U105 Series Common Mode Chokes
P52U157-502-2.3
2.3 Ampere (A) Rated Current (Irms) P52U157 Series Common Mode Choke 		P52U105 Series Common Mode Chokes
P52U157-802-1.6
1.60 Ampere (A) Rated Current (Irms) P52U157 Series Common Mode Choke
Minimum Inductance N/A 0.6 mH N/A 1.0 mH N/A 2.0 mH N/A 5 mH N/A 8 mH
Rated Current (Irms) N/A 4.40 A N/A 3.60 A N/A 2.9 A N/A 2.3 A N/A 1.60 A
Industry Standards / Certifications N/A RoHS Compliant
Standard Operating Temperature Range N/A -40 to +85 ºC
Dielectric Withstanding Voltage (Vrms) N/A 3750 V
Available Design N/A Custom
Note N/A
  1. Inductance measured: 1 kHz, 0.1 Vrms
  2. Polarity: 1 and 4 are in phase
  3. Turns Ratio: 1:1 (1-2 to 4-3)
  4. ΔT ≤ 35 ºC Temperature Rise at rated current
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.008 .XXX : ±0.004
mm: X.X : ±0.20 X.XX : ±0.10
Maximum Direct Current Resistance (DCR) N/A 30 mOhm N/A 30 mOhm N/A 60 mOhm N/A 100 mOhm N/A 200 mOhm