Item # N5101-4, N5101 Series 1 x 4 RJ-45 10/100 Base-T Jack with Magnetic Module On MPS Industries, Inc.

Request Information

RJ-45 1xN, Tab-Down, 8 pin with internal magnetics
Available with and without LEDs
Suitable for CAT 5 and 6 Fast Ethernet cable or better UTP

Unit of Measure

Electrical Specification at 25 ºC | Specifications | Note

Electrical Specification at 25 ºC

1xN	N/A 1 x 4
Turns Ratio ±2 % (TX)	N/A 1CT:1
Turns Ratio ±2 % (RX)	N/A 1CT:1
Maximum Insertion Loss (0.1-100 MHz)	N/A -1.1 dB
Minimum Return Loss (1-30 MHz)	N/A -18 dB
Minimum Return Loss (30-60 MHz)	N/A -14 dB
Minimum Return Loss (60-80 MHz)	N/A -12 dB
Typical Crosstalk (1-100 MHz)	N/A -40 dB
Typical Common Mode Rejection (30-100 MHz)	N/A -35

Specifications

Industry Standards / Certifications	N/A IEEE 802.3 RoHS Compliant
Minimum Isolation (Vrms)	N/A 1500 V
Standard Operating Temperature Range	N/A 0 to +70 ºC
Electrical Connector Type	N/A Category 5 Category 6 Ethernet RJ-45

Note

N/A Inductance: 350 µH Minimum at 100 kHz, 0.1 Vrms with 8 mA DC

Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are :
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX:±0.10