Item # M6212-12, 1.20 Microhenry (µH) Maximum Inductance LL (1-3) M6212 Series RS-485/RS-422 Interface Push-Pull Transformer On MPS Industries, Inc.

Request Information Sample or Quote Request SMPS Transformer Custom Design

Designed for use with the Maxim™ MAX253 and MAX845 monolithic oscillator/power driver 3.3 V / 5.0 V source
Construction complies with IEC 60950 Basic, Supplementary, and Reinforced isolation requirements
UL60601 and VDE compliant designs available upon request

Unit of Measure

Electrical Parameters at 25 ºC | Specifications | Note

Electrical Parameters at 25 ºC

Turns Ratio (1-3 : 6-4) (±5 %)	N/A 1CT : 2CT
Typical Inductance (1-3)	N/A 500 µH
Minimum ET(1-3)	N/A 11 V-µSec
Maximum Direct Current Resistance (DCR) (1-3)	N/A 1.00 Ohm
Maximum Inductance L_L (1-3)	N/A 1.20 µH
Maximum Capacitance Cww (1-3 to 6-4)	N/A 50 pF
Hipot (1-3 to 6-4)	N/A 4500 Vrms

Specifications

Industry Standards / Certifications	N/A EN60950 IEC 60950 IEC950 RoHS Compliant UL1950 UL60601 VDE
Standard Operating Temperature Range	N/A -40 to +85 ºC
Monolithic Oscillator Voltage	N/A 3.3 V
Power Driver Voltage	N/A 5.0 V
Available Design	N/A Custom

Note

N/A

OCL, L_L, C_WW measured at 100 kHz, 0.1 Vrms

Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10