- Ideal for wideband and RF instrumentation applications
- Can be used for Impedance Matching, Signal Isolation and Balance to Unbalanced conversion
Unit of Measure
Electrical Parameters at 25 ºC
Secondary/Primary Impedance Ratio (±10%) |
N/A 1 : 4 |
Typical Bandwidth |
N/A 6.5 to 1000 MHz |
Typical Insertion Loss |
N/A 0.90 dB |
Minimum Primary OCL (4-6) |
N/A 5.0 µH |
Maximum Primary Direct Current Resistance (DCR) (4-6) |
N/A 0.060 Ohm |
Minimum Secondary OCL (1-3) |
N/A 20.0 µH |
Maximum Secondary Direct Current Resistance (DCR) (1-3) |
N/A 0.120 Ohm |