Item # PSF109-221M, 220 Microhenry (µH) Inductance (±20%) PSF109 Series Magnetic Epoxy Shielded Surface Mount Technology (SMT) Power Fixed Inductor On MPS Industries, Inc.

Request Information Sample or Quote Request Inductor Custom Design

Magnetic shielding using magnetic epoxy resin results in lower costs as compared to traditional ferrite shielded inductors

Unit of Measure

Electrical Parameters at 25 ºC | Specifications | Note

Electrical Parameters at 25 ºC

Inductance (±20%)	N/A 220 µH
Maximum Saturation Current (I_sat) (Adc)	N/A 0.86 A
Maximum Direct Current Resistance (DCR)	N/A 0.27 Ohm

Specifications

Length	N/A 10.5 mm
Width	N/A 10.3 mm
Height	N/A 10.0 mm
Industry Standards / Certifications	N/A RoHS Compliant
Standard Operating Temperature Range	N/A -40 to +120 ºC
Available Design	N/A Custom

Note

N/A

Inductance measured at 100 kHz, 0.1 Vrms
Isat: ΔL drops 30% maximum from its initial value

Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10