Item # R3600-6, 500 Microhenry (µH) Minimum Inductance (1-4) R3600 Series Wideband Isolation Transformer On MPS Industries, Inc.

Request Information

For RF, DS3/E3, Broadband, BPL and Ethernet Magnetics which require Supplementary or Reinforced Isolation
Construction complies with IEC60950 Isolation requirements

Unit of Measure

Electrical Parameters at 25 ºC | Specifications | Note

Electrical Parameters at 25 ºC

Turns Ratio (Primary : Secondary) (±5 %)	N/A 1:1.224
Minimum Inductance (1-4)	N/A 500 µH
Maximum Direct Current Resistance (DCR) (1-4)	N/A 0.50 Ohm
Maximum Insertion Loss (1 MHz)	N/A -0.8 dB
Maximum Insertion Loss (100 MHz)	N/A -1.0 dB
Typical Insertion Loss (300 MHz)	N/A -3.0 dB
Hipot (Primary to Secondary)	N/A 3000 Vrms
Schematic	N/A B

Specifications

Standard Operating Temperature Range¹	N/A 0 to +70 ºC
Available Impedance Data	N/A 50 Ohm75 Ohm
Industry Standards / Certifications	N/A IEC60950 RoHS Compliant
Available Design	N/A Custom

Note

N/A

OCL measured @ 100 kHz, 0.1 Vrms at Pin 1-4 (with 2-3 shorted)
Insertion Loss measured with 100 ohm as Input (Primary) Impedance between 1-4 and Output (Secondary) load with respective impedance
50 Ohm and 75 Ohm impedance data available upon request

Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10