MPS Industries, Inc.
Print Back
  • Current compensated noise suppression common mode chokes
  • Horizontal mount version; unpotted for cost reduction
  • Dielectric withstanding voltage: 1500 Vrms (between windings)
P505H Series 2 Phase Common Mode Chokes
Unit of Measure
Items P505H Series 2 Phase Common Mode Chokes
P505H-03
2.5 Ampere (A) Current P505H Series 2 Phase Common Mode Choke Fixed Inductor 		P505H Series 2 Phase Common Mode Chokes
P505H-10
1.2 Ampere (A) Current P505H Series 2 Phase Common Mode Choke Fixed Inductor 		P505H Series 2 Phase Common Mode Chokes
P505H-27
0.7 Ampere (A) Current P505H Series 2 Phase Common Mode Choke Fixed Inductor 		P505H Series 2 Phase Common Mode Chokes
P505H-39
0.5 Ampere (A) Current P505H Series 2 Phase Common Mode Choke Fixed Inductor
OCL (±30 %) N/A 3.3 mH N/A 10 mH N/A 27 mH N/A 39 mH
Current N/A 2.5 A N/A 1.2 A N/A 0.7 A N/A 0.5 A
Direct Current Resistance (DCR)(±20 %) N/A 0.07 Ohm N/A 0.30 Ohm N/A 0.62 Ohm N/A 1.12 Ohm
SRF (Typ) N/A 700 kHz N/A 350 kHz N/A 180 kHz N/A 160 kHz
Alternating Current (AC) Rate Voltage N/A 250 V
Dielectric Withstanding Voltage (Vrms)1 N/A 1500 V
Industry Standards / Certifications N/A RoHS Compliant
Standard Operating Temperature Range N/A 0 to +70 ºC
Available Design N/A Custom (Available upon request)
Note N/A
  1. OCL measured: 1 kHz, 0.1 Vrms
  2. Polarity: 1 and 2 are in phase
  3. Turns Ratio: 1:1 ±0 % (1-7 to 2-8)
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10
  • 1 Between Windings