MPS Industries, Inc. - P191 Series Passive Power Factor Correction Fixed Inductors

Unit of Measure

Items	P191-301-1 300 Microhenry (µH) Inductance (±15%) P191 Series Passive Power Factor Correction Fixed Inductor	P191-501-1 500 Microhenry (µH) Inductance (±15%) P191 Series Passive Power Factor Correction Fixed Inductor	P191-751-1 750 Microhenry (µH) Inductance (±15%) P191 Series Passive Power Factor Correction Fixed Inductor	P191-102-1 1000 Microhenry (µH) Inductance (±15%) P191 Series Passive Power Factor Correction Fixed Inductor	P191-152-1 1500 Microhenry (µH) Inductance (±15%) P191 Series Passive Power Factor Correction Fixed Inductor
Inductance (±15%)	N/A 300.0 µH	N/A 500 µH	N/A 750 µH	N/A 1000 µH	N/A 1500 µH
Maximum Direct Resistance (R_DC)	N/A 0.50 Ohm	N/A 0.65 Ohm	N/A 0.90 Ohm	N/A 1.20 Ohm	N/A 1.20 Ohm
Direct Current (DC) (Idc)	N/A 1.0 A
Maximum Dimension A	N/A 21.0 mm	N/A 21.0 mm	N/A 23.0 mm	N/A 25.0 mm	N/A 27.5 mm
Maximum Dimension B	N/A 11.0 mm	N/A 11.0 mm	N/A 12.5 mm	N/A 11.0 mm	N/A 12.5 mm
Nominal Dimension C	N/A 9.0 mm	N/A 9.0 mm	N/A 10.0 mm	N/A 9.0 mm	N/A 10.5 mm
Nominal Dimension D	N/A 18.0 mm	N/A 18.0 mm	N/A 20.0 mm	N/A 22.5 mm	N/A 25.0 mm
Nominal Dimension E	N/A 0.40 mm
Minimum Switching Frequency	N/A 32 kHz
Maximum Alternating Current (AC) Line Voltage (Vac)	N/A 265 V
Standard Operating Temperature Range	N/A -40 to +130 ºC
Available Design	N/A custom
Note	N/A Inductance test @ 10 kHz, 0.1 Vrms I_DC: 10% roll off Typical (20% Maximum) from initial inductance value Add -V for Vertical Mount, -H for Horizontal Mount, -W for Hook Up wire Extended length hook up wire with Fast-On available on request Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X.X : ±0.38 X.XX : ±0.10