MPS Industries, Inc. - P192 Series Power Factor Correction Fixed Inductors

Unit of Measure

Items	P192-501-2 2.5 Ampere (A) Direct Current (DC) (Idc) P192 Series Power Factor Correction Fixed Inductor	P192-401-3 3.0 Ampere (A) Direct Current (DC) (Idc) P192 Series Power Factor Correction Fixed Inductor	P192-301-4 4.0 Ampere (A) Direct Current (DC) (Idc) P192 Series Power Factor Correction Fixed Inductor	P192-601-2 2.5 Ampere (A) Direct Current (DC) (Idc) P192 Series Power Factor Correction Fixed Inductor	P192-501-3 3.0 Ampere (A) Direct Current (DC) (Idc) P192 Series Power Factor Correction Fixed Inductor
Primary Inductance L (3-4) (±10%)	N/A 500 µH	N/A 400 µH	N/A 300 µH	N/A 600 µH	N/A 500 µH
Direct Current (DC) (Idc)	N/A 2.5 A	N/A 3.0 A	N/A 4.0 A	N/A 2.5 A	N/A 3.0 A
Maximum Direct Current Resistance (DCR) (3-4)	N/A 0.20 Ohm	N/A 0.20 Ohm	N/A 0.20 Ohm	N/A 0.20 Ohm	N/A 0.15 Ohm
Maximum Auxiliary Rdc (9-10)	N/A 0.18 Ohm	N/A 0.18 Ohm	N/A 0.18 Ohm	N/A 0.18 Ohm	N/A 0.25 Ohm
Primary : Auxiliary Turns Ratio (9-10)	N/A 5 : 1
Industry Standards / Certifications	N/A RoHS Compliant
Switching Frequency	N/A >45 kHz
Alternating Current (AC) Input Voltage	N/A 85 to 265 V
Input Frequency	N/A 43 to 63 Hz
Standard Operating Temperature Range	N/A -40 to +100 ºC
Available Design	N/A Ultra low audio noise design Ultra low heat dissipation design
Note	N/A Inductance test @ 100 kHz, 0.1 V_rms Idc: 10% roll off max from initial inductance value Hipot: 1500 Vrms, 5S, 1 mA, Primary to Auxiliary Product performance is limited to specified parameters. Data is subject to change without prior notice. Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ±0.015 .XXX : ±0.004 mm: X.X : ±0.38 X.XX : ±0.10