MPS Industries, Inc.
MPS Industries, Inc.
Address: 19210 S. Vermont Avenue
Building D-415
Gardena, CA 90248
Tel: 310.325.1043
Fax: 800-000-0000
Email: sales@mpsind.com
Website: www.mpsind.com
Print Back
PCB mounted PFC inductor with Aux winding
Unit of Measure

Electrical Parameters at 25 ºC

Primary Inductance L (3-4) (±10%)

 N/A 400 µH

Direct Current (DC) (Idc)

 N/A 4.0 A

Maximum Direct Current Resistance (DCR) (3-4)

 N/A 0.15 Ohm

Maximum Auxiliary Rdc (9-10)

 N/A 0.25 Ohm

Primary : Auxiliary Turns Ratio (9-10)

 N/A 5 : 1

Specifications

Industry Standards / Certifications

 N/A RoHS Compliant

Switching Frequency

 N/A >45 kHz

Alternating Current (AC) Input Voltage

 N/A 85 to 265 V

Input Frequency

 N/A 43 to 63 Hz

Standard Operating Temperature Range

 N/A -40 to +100 ºC

Available Design

 N/A Ultra low audio noise design Ultra low heat dissipation design

Inductance

 N/A 400 µH

Maximum Direct Current Resistance (DCR)

 N/A 0.15 mOhm

Note

N/A

  1. Inductance test at 100 kHz, 0.1 Vrms
  2. Idc: 10% roll off max from initial inductance value
  3. Hipot: 1500 Vrms, 5S, 1 mA, Primary to Auxiliary
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10