MPS Industries, Inc.
MPS Industries, Inc.
Address: 19210 S. Vermont Avenue
Building D-415
Gardena, CA 90248
Tel: 310.325.1043
Fax: 800-000-0000
Email: sales@mpsind.com
Website: www.mpsind.com
Print Back
  • Designed for use with the Maxim™ MAX253 and MAX845 monolithic oscillator/power driver 3.3 V / 5.0 V source
  • Construction complies with IEC 60950 Basic, Supplementary, and Reinforced isolation requirements
  • UL60601 and VDE compliant designs available upon request
Unit of Measure

Electrical Parameters at 25 ºC

Turns Ratio (1-3 : 6-4) (±5 %)

 N/A 1CT : 2.2CT

Inductance (1-3)

 N/A 250 µH

Minimum ET(1-3)

 N/A 11 V-µSec

Maximum Direct Current Resistance (DCR) (1-3)

 N/A 1.00 Ohm

Maximum Inductance LL (1-3)

 N/A 1.00 µH

Maximum Capacitance Cww (1-3 to 6-4)

 N/A 50 pF

Hipot Root Mean Square (Vrms) Voltage (1-3 to 6-4)

 N/A 4500 V

Specifications

Industry Standards / Certifications

 N/A EN60950 IEC 60950 IEC950 RoHS Compliant UL1950 UL60601 VDE

Standard Operating Temperature Range

 N/A -40 to +85 ºC

Monolithic Oscillator Voltage

 N/A 3.3 V

Power Driver Voltage

 N/A 5.0 V

Available Design

 N/A Custom

Note

N/A

  • OCL, LL, CWW measured at 100 kHz, 0.1 Vrms
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10