MPS Industries, Inc.
Print Back
  • Small footprint package
  • High efficiency and low cost
  • Open construction with sleeve to protect winding
  • Inductance tolerance: M = ±20%, K = ±10%
Unit of Measure

Electrical Parameters at 25 ºC

Storage Temperature Range

 -40 to +125 ºC

Inductance Tolerance (M)

 ±20 %

Inductance Tolerance (K)

 ±10 %

Inductance

 47 µH

Minimum Quality Factor (Q)

 70

Maximum Direct Current Resistance (DCR)

 0.16 Ohm

Saturation Current (Isaturation)

 0.70 A

Specifications

Industry Standards / Certifications

 RoHS Compliant

Standard Operating Temperature Range

 -40 to +85 ºC

Note

N/A

  1. Inductance measured: <100 µH : 100 kHz, 0.25 Vrms
  2. Inductance measured: ≥100 µH : 1 kHz, 0.25 Vrms
  3. Irated: 10% drop typical from initial inductance value and/or ΔT ≤ 40 ºC Temp Rise typical
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10