MPS Industries, Inc.
Print Back
  • Ideal for wideband and RF instrumentation applications
  • Can be used for Impedance Matching, Signal Isolation and Balance to Unbalanced conversion
Unit of Measure

Electrical Parameters at 25 ºC

Secondary/Primary Impedance Ratio (±10%)

 N/A 1 : 1

Typical Bandwidth

 N/A 3.5 to 750 MHz

Typical Insertion Loss

 N/A 0.58 dB

Minimum Primary OCL (4-6)

 N/A 11.0 µH

Maximum Primary Direct Current Resistance (DCR) (4-6)

 N/A 0.075 Ohm

Minimum Secondary OCL (1-3)

 N/A 11.0 µH

Maximum Secondary Direct Current Resistance (DCR) (1-3)

 N/A 0.075 Ohm

Specifications

Bandwidth

 N/A 1 to 1200 MHz

Industry Standards / Certifications

 N/A RoHS Compliant

Standard Operating Temperature Range

 N/A -40 to +85 ºC

Available Design

 N/A custom

Note

N/A Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10