MPS Industries, Inc.
Print Back
  • Magnetic shielding using magnetic epoxy resin results in lower costs as compared to traditional ferrite shielded inductors
Unit of Measure

Electrical Parameters at 25 ºC

Inductance (±20%)

 N/A 1000 µH

Maximum Saturation Current (Isat) (Adc)

 N/A 0.40 A

Maximum Direct Current Resistance (DCR)

 N/A 1.43 Ohm

Specifications

Length

 N/A 10.5 mm

Width

 N/A 10.3 mm

Height

 N/A 10.0 mm

Industry Standards / Certifications

 N/A RoHS Compliant

Standard Operating Temperature Range

 N/A -40 to +120 ºC

Available Design

 N/A custom

Note

N/A

  1. Inductance measured at 100 kHz, 0.1 Vrms
  2. Isat: ΔL drops 30% maximum from its initial value
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10