MPS Industries, Inc.
MPS Industries, Inc.
Address: 19210 S. Vermont Avenue
Building D-415
Gardena, CA 90248
Tel: 310.325.1043
Fax: 800-000-0000
Email: sales@mpsind.com
Website: www.mpsind.com
Print Back
Magnetic shielding using magnetic epoxy resin results in lower costs as compared to traditional ferrite shielded inductors
Unit of Measure

Electrical Parameters at 25 ºC

Maximum Saturation Current (Isat) (Adc)

 N/A 0.36 A

Specifications

Length

 N/A 7.5 mm

Width

 N/A 7.0 mm

Height

 N/A 4.5 mm

Industry Standards / Certifications

 N/A RoHS Compliant

Standard Operating Temperature Range

 N/A -40 to +120 ºC

Available Design

 N/A Custom

Inductance

 N/A 220 µH

Maximum Direct Current Resistance (DCR)

 N/A 1170 mOhm

Note

N/A

  1. Inductance measured at 100 kHz, 0.1 Vrms
  2. Isat: ΔL drops 25% maximum from its initial value
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10