MPS Industries, Inc.
Print Back
  • For RF, DS3/E3, Broadband, BPL and Ethernet Magnetics which require Supplementary or Reinforced Isolation
  • Construction complies with IEC60950 Isolation requirements
Unit of Measure

Electrical Parameters at 25 ºC

Turns Ratio (Primary : Secondary) (±5 %)

 N/A 1:2

Minimum Inductance (1-4)

 N/A 120 µH

Maximum Direct Current Resistance (DCR) (1-4)

 N/A 0.20 Ohm

Maximum Insertion Loss (1 MHz)

 N/A -0.8 dB

Maximum Insertion Loss (100 MHz)

 N/A -1.0 dB

Typical Insertion Loss (300 MHz)

 N/A -1.5 dB

Hipot (Primary to Secondary)

 N/A 4500 Vrms

Schematic

 N/A B

Specifications

Standard Operating Temperature Range1 N/A 0 to +70 ºC

Available Impedance Data

 N/A 50 Ohm75 Ohm

Industry Standards / Certifications

 N/A IEC60950 RoHS Compliant

Available Design

 N/A custom

Note

N/A

  • OCL measured @ 100 kHz, 0.1 Vrms at Pin 1-4 (with 2-3 shorted)
  • Insertion Loss measured with 100 ohm as Input (Primary) Impedance between 1-4 and Output (Secondary) load with respective impedance
  • 50 Ohm and 75 Ohm impedance data available upon request
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10

  • 1 Extended operating temperature available upon request.