MPS Industries, Inc.
Print Back
  • Isolation transformers used to eliminate hum bars or other interference problems due to differences in ground potential or induced common mode noise.
  • Ideal for use in CCTV (closed circuit television) applications
  • Dimensions: 1.450 x 1.020 x 0.660 inches maximum
Unit of Measure

Electrical Parameters at 25 ºC

Impedance Ratio (1-3 : 6-4) (±5%)

 N/A 75:100 Ohm

Bandwidth

 N/A 60Hz-6MHz

Maximum Insertion Loss @ 100 KHz

 N/A 0.50 dB

Minimum Inductance (1-3)

 N/A 400 mH

Maximum Direct Current Resistance (DCR) (1-3)

 N/A 6.0 Ohm

Specifications

Direct Current (DC) Isolation Voltage (Primary to Secondary)

 N/A 250 V

Standard Operating Temperature Range

 N/A 0 to +70 ºC

Available Design

 N/A custom

Industry Standards / Certifications

 N/A RoHS Compliant

Note

N/A

  1. Polarity: 1 and 6 are in phase
Product performance is limited to specified parameters. Data is subject to change without prior notice.

Dimensions
Unless otherwise specified, all tolerances are:
inch: .XX : ±0.015 .XXX : ±0.004
mm: X.X : ±0.38 X.XX : ±0.10