Item # HWIA2918-028A-100S, 10.0 Microhenry (µH) Inductance (±10%) HWIA2918S Series High Current Helical Edge Wound (HEW) Flat Wire Inductor On MPS Industries, Inc.

Request Information Sample or Quote Request Inductor Custom Design

High Current HEW™ Inductor in low-profile compact form
Very low DCR
True 30 Amp handling capability on the wire (at high "L", Isat is more critical)
Dummy 3rd pin for mounting stability

Unit of Measure

Electrical Parameters at 25 ºC | Specifications | Note

Inductance (±10%)	N/A 10 µH
Nominal Direct Current (DC) Resistance	N/A 2.40 mOhm
Maximum Direct Current (DC) Resistance	N/A 2.70 mOhm
Isat (Typ) 10% drop	N/A 30.0 A
Isat (Typ) 20% drop	N/A 32.0 A
Isat (Typ) 30% drop	N/A 34.0 A
Irms (Typ) 20ºC rise	N/A 20 A
Irms (Typ) 40ºC rise	N/A 28 A
SRF (Typ)	N/A 15.8 MHz

Available Design	N/A Custom
Industry Standards / Certifications	N/A RoHS Compliant
Standard Operating Temperature Range	N/A -40 to 180 ºC

N/A

Inductance measured at 500 kHz, 0.1 Vrms, 0 Adc on Agilent/HP 4284A LCR meter or Equivalent.
DCR measured on GW Instek GOM-802 Microhmmeter or Equivalent.
DC Current at 25°C resulting in % drop of inductance from zero current. Isat is the more critical current specification when less than Irms.
Current that causes a specificed temperature rise in an inductor from 25°C ambient. This specification is for reference only as the actual Temperature Rise will depends on the type of wires used and the cooling available (convection via airflow, or conduction through mounting to heat sink). The actual Temperature Rise will be much lower as the flat wire has greater surface for heat dissipation under power.
SRF measured using Agilent/HP 4395A network analyzer and an Agilent/HP 43961A test fixture.